
This example kitchen includes 15 units of furniture:
- 1 x 60cm integrated fridge/freezer housing
- 1 x 60cm shelved tall larder
- 3 x 90cm drawers
- 3 x 90cm wall units, including canopy extractor housing
- 2 x 60cm oven unit housings
- 2 x 45cm base cupboards
- 1 x 60cm base cupboard
- 1 x 60cm sink cupboard
- 1 x 60cm integrated dishwasher front
- Side & island panels included
These prices are to be used only as a guide. Please contact us to receive your complimentary design and quotation. Prices include kitchen furniture only.
£8,112
Melamine finishes: Melamine coated MDF panels available in a wide variety of decorative wood effects:











Material melamine finishes: Melamine coated MDF panels available in a wide variety of decorative stone and material effects:









Melamine supermatt finishes: The finish is applied through high-temperature pressing processes that makes the surface of the panels extremely matt with a soft-touch effect:







Tecnolux & Tecnomatt finishes: MDF panels coated externally in a sheet of PET, available in white with a choice of matt or gloss.

£9,195
Tecnolux finishes: MDF panels coated externally in a sheet of PET, available in a range of glossy colours:



Tecnomatt finishes: MDF panels coated externally in a sheet of PET, available in a range of matt colours:




£11,900
Sand Lacquer: The latest generation of coloured, water-based lacquer coated onto MDF panels, creating a pleasant silk finish to the touch. Custom RAL colours available at surcharge.





















Fenix NTM: Thanks to its technology, Fenix NTM features advanced properties, such as an extremely matt, soft touch and anti-fingerprint surfaces:



£14,600
Glossy Lacquered: A polished finish applied evenly using robotized systems that leaves no imperfections. The lacquer is brushed repeatedly before being left to harden. Custom RAL colours available at surcharge.





















HPL Laminate: An HPL laminate film is coated on both sides of a wood fibreboard, in a variety of colours.










£15,400
Brushed Oak: A chipboard panel faced on both sides and on 4 edges with a sheet of oak veneer, available in a variety of effects:










Fenix NTM JTIME: Thanks to its technology, Fenix NTM JTIME features advanced properties, such as an extremely matt, soft touch and anti-fingerprint surfaces:











£18,650
Soft Touch Lacquered: The use of special features and application techniques that creates a finish soft to the touch.




£19,000
Glossy/Frosted Glass: A 4mm glossy or frosted glass front on top of an internal face which is lacquered with acrylic-based coatings








£21,000
Oxidised Lacquered: A scratch resistant, long lasting metallic finish:






Stained Fir: 3-4mm thick solid fir wood claddings on both sides. Panels are joined to obtain a staved effect. Wood veneered edges in 1mm thick fir wood:




Fenix NTA JTIME: Thanks to its technology, Fenix NTA JTIME features advanced properties, such as an extremely matt, soft touch and anti-fingerprint surfaces:



Flamed Oak: A chipboard panel is faced on both sides and on 4 edges with a sheet of oak veneer, carefully selected and applied to obtain an irregular, flamed veneer, slatted effect:



Antique Oak: A chipboard panel is faced on both sides and 4 edges with a sheet of oak veneer. Deep knots and cracks can be found which are protected by the varnish applied, giving it an antique look:



£21,600
Gres: Stoneware slabs are made with advanced technology which combined reduced thickness with high strength and resistance to chemical products. They are extremely easy to clean and maintain:















MDi: MDi is produced by pressing thanks to an innovative continuous press system. The cooking process is carried out at maximum temperatures of 1200° C, in fast-cycle ovens that guarantee minimum levels of water absorption.









Metal Lacquered: Semi-automatic spraying on both faces and on all edges of a pre-finished primer panel. Drying and sanding processes precedes a manual antiquing satin finish. Once dryed a semi-matt acrylic coating is applied.




Eucalyptus: Eucalyptus veneered claddings on both sides:


Elm: Elm veneered claddings on both sides:




Walnut: Walnut veneered claddings on both sides:


POA
Steel: Stainless Steel AISI 304 claddings on both sides. The finish can be either satin or vintage:


£29,200
Corian: Corian is a solid, non porous uniform material consisting of natural minerals. It is uniformly compact and can be produced with seamless joints which makes the surface ultra-hygienic:

Olive Tree: Olive Tree Wood veneered claddings on both sides:

Chestnut: Chestnut wood veneered claddings on both sides:





Ebony: Ebony wood veneered claddings on both sides:
